All baths require the support of a well-constructed timber frame. If you’re planning on installing a new bath into your home, you will need to know how to build the bath frame to size, reinforce the frame and install it correctly into your bathroom. Building frames for baths requires a lot of care and focus. So, if you want to get it right, follow this step by step guide: Step 1. Make a Mark on the Wall for the Top of the Bath Frame The first step is to measure your bath’s height. Add about 80mm onto this and mark that height on your wall studs. This mark represents the top of the bath frame, and the extra 80mm makes room for differences in floor height. Step 2. To Support the Bath Frame, Install Noggins between the Joists and Wall Take a measurement of the gaps between each of the wall joists at the height of the line. Using a circular saw, cut a timber noggin to size for each gap, then nail the noggins into the gaps using a nail gun. These noggins will help hold external ...
from 411HomeRepair.com http://www.411homerepair.com/diy/kitchen-bath/10020-How-to-Build-a-Bath-Frame.html
No comments:
Post a Comment